Tel. 01709 869 756 (International +44 1709 869 756)
Fax. 01709 860 576 (International +44 1709 860 576)
 |
| 2. Add to Basket |
|
 |
|
|
|
|
|  |  |  |  |  |
Magneto gasket, 0.5mm thick Made for us to original designs this is a magneto housing gasket for any Series 1, 2 or 3 Lambretta. | |  |
Magneto gasket, 1mm thick New MBD mag gaskets made from a special stronger material.
Comes in slightly wider 1mm thickness which helps giving some clearance between crank web and mag housing.
Aim for 0.5mm gap between crank and mag housing for a reliable engine.
| |  |
Magneto gasket, 1.5mm thick, MRB A new improved mag housing gasket.
Made from 1.5mm thick special material to space out a mag housing.
Some cranks stick out further and some mag housing fit in further.
This gasket allows you to space the gap between the crank and mag housing.
The gap needs to be 0.5mm
| |  |
Mag housing gaskets set of 3, 0.5mm, 1mm, and 1.5mm thick. MRB This set of three MBD mag housing gaskets come in 3 thicknesses 0.5, 1.00 and 1.5mm.
All engines vary, especially new rebuilds, cranks vary in width, casings and mag housings vary so you never know what gap you will get between the crank and mag housing on assembly.
This gap should be 0.5mm to be safe.
| |
|  |  |  |  |
|
|
MB Developments Limited Unit 17, Broomhouse Lane Industrial Estate, Edlington, Doncaster, South Yorkshire, DN12 1EQ, United Kingdom
MB Developments UK Ltd - Registered in England & Wales - Company Reg No.: 469 7729 Vat No.: 811 8454 38
Tel. 01709 869 756 (International +44 1709 869 756) Fax. 01709 860 576 (International +44 1709 860 576)
