Air filter, Series 3, Italian

 

Air filter, Series 2, Italian

This is a standard air box filter for Series 1 and 2 scooters.

It is not as long as a Series 3 one so you will find that a Series 3 one would not fit so here is the correct one for you!

 

Air filter, Spanish

This filter, remade after being unavailable for many years, is for Spanish type air boxes - i.e. ones that are part of the toolbox and the kidney shaped ones as found on Lynx models.

 

Remote Ram air filter, fits 25mm Dell\'ortos, MRB

Ever since people started fitting non-standard carburettors they have been cursed with petrol and oil mixture all over their bodywork and legs.

Engines will wear out due to the sandblast effect of running without a filter.

This filter was designed by Mark Broadhurst so you don't us the original air filter box.

Some rejetting may be required.

(Filter may vary in appearence to one in picture)

 

Ram air filter fits around air bellows

This ram air filter can be bonded to a standard air hose to make a remote air filter.

 

Ram air filter fits Dell\'orto 30 - 39mm

This ram air filter fits onto the bell mouth of a Dellorto VHSA carburettor.

Due to its height it will not fit a scooter with bodywork unless you have a hole in the panel.

 

Ram air filter fits Amal 28 - 34mm

This ram air filter fits onto the bell mouth of a Mark 2 Amal carburettor it also fits a 30mm Dellorto PHBH when using the plastic bellmouth.

Due to its height it will not fit a scooter with bodywork unless you have a hole in the panel, but if you have an Amal carburettor you probably have a hole anyway.

 

Ram air filter fits Mikuni 35mm

This ram air filter fits onto the bell mouth of a Mikuni 32 and 35mm TMX carburettor.

Due to its height it will not fit a scooter with bodywork unless you have a hole in the panel.